Servos – Available On Market

Best Servos
Disclaimer: As An Amazon Associate I Earn From Qualifying Purchases.
NoProductScoreAction
14Pcs SG90 9g Micro Servos for RC Robot Helicopter Airplane Controls Car Boat9.8Buy On Amazon
2[4-Pack] MG996R 55g Metal Gear Torque Digital Servo Motor for Futaba JR RC Helicopter Car Boat Robot9.6Buy On Amazon
34PCS Servo Motor MG995 Control Angle180 Metal Gear Servo 20KG Digital High Speed Torque Servo Motor for Smart Car Robot Boat RC Helicopter9.6Buy On Amazon
4LM YN 25 Watt 20 Ohm 5% Wirewound Resistor Electronic Aluminium Shell Resistor Gold for Inverter LED Lights Frequency Divider Servo Industry Industrial Control 2-Pcs9.6Buy On Amazon
5Smraza 10 Pcs SG90 9G Micro Servo Motor Kit for RC Robot Arm/Hand/Walking Helicopter Airplane Car Boat Control with Cable9.4Buy On Amazon
6RGBZONE 4Pcs ES08MA II 12g Mini Metal Gear Analog Servo Shockproof Stable Machine Compatible for RC Model9Buy On Amazon
7ZOSKAY 35kg high Torque Coreless Motor servo Metal Gear Digital and Stainless Steel Gear servo arduino servo for Robotic DIY8.8Buy On Amazon
8ANNIMOS 20KG Digital Servo High Torque Full Metal Gear Waterproof for RC Model DIY8.6Buy On Amazon
9ZOSKAY Servo High Torque Metal Gear Standard Digital Servo 25KG/0.13S 6.8V for 1/8 1/10 RC Cars(Control Angle 180)8.2Buy On Amazon
10ANNIMOS 35KG Coreless Digital Motor Servo 7.4V High Speed Stainless Steel Gear High Torque Waterproof Standard Baja Servos (270 Degrees)8.2Buy On Amazon

Table Of Content:

1. 4Pcs SG90 9g Micro Servos for RC Robot Helicopter Airplane Controls Car Boat

  • High quality and high cost performance.
  • Operating speed: 0.1second/ 60degree ( 4.8V no load)
  • Operating voltage: 4.8-6V
  • Small size and light weight.
  • Application: Used for fixed-wing, helicopter, KT, glider, small robot, robotic arm and other models.

2. [4-Pack] MG996R 55g Metal Gear Torque Digital Servo Motor for Futaba JR RC Helicopter Car Boat Robot

  • This MG996R Servo motor which updated from SG90 and MG90S micro servo motor.
  • The MG996R model compliant with most standard receiver connector,for Futaba, Hitec, Sanwa, GWS etc.
  • Power Supply: Through External Adapter. Stable and Shock Proof. Coreless Motor , Metal Gear .
  • Torque at 6V 12kg/cm, 7.
  • Universally Applicable: Micro Servo Motor for 1:10 RC car robot helicopter servo remote controlled aircraft and suitable for most DIY projects.

3. 4PCS Servo Motor MG995 Control Angle180 Metal Gear Servo 20KG Digital High Speed Torque Servo Motor for Smart Car Robot Boat RC Helicopter

  • This high-speed standard servo motor can rotate 180 degrees (90 in each direction).
  • Good performance digital standard servo, which can be a common use for robots, mechanical arms, climbing cars and remote control toys.
  • Connector wire length 300mm.
  • Torque at 6V 12kg/cm, 7.
  • This servo offers a full range of 180° with metal gears.

4. LM YN 25 Watt 20 Ohm 5% Wirewound Resistor Electronic Aluminium Shell Resistor Gold for Inverter LED Lights Frequency Divider Servo Industry Industrial Control 2-Pcs

  • Product Name : Aluminium Shell Resistors; Resistance Value :20 Ω.
  • Power Rating : 25W; Resistance accuracy : ± 5% (J)
  • Dimension : 27*15*15.
  • Suitable for inverter, LED lights, speakers, frequency divider, servo industry ,Speaker equipment and other industrial control .
  • If you for any reason are not happy with any product supplied , please do not hesitate to contact us and we will do our best to solve your problem .

5. Smraza 10 Pcs SG90 9G Micro Servo Motor Kit for RC Robot Arm/Hand/Walking Helicopter Airplane Car Boat Control with Cable

  • SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats.
  • Interface Type: Compatible with JR & FUTABA interface.
  • Stall Torque (4.8V): 17.5oz /in (1kg/cm). Dead band setting: 7 microseconds
  • Amplifier Type: Analog controller. Operating Voltage: 4.8V~6.0V
  • Please Note: The starting current of the motor should be greater than 1A.

6. RGBZONE 4Pcs ES08MA II 12g Mini Metal Gear Analog Servo Shockproof Stable Machine Compatible for RC Model

  • Made of high-quality materials, very wear-resistant, light weight, can not be easily damaged
  • Mini metal gears, can be shockproof, low noise, stable performance
  • Operating voltage: 4.
  • We provide you with 4PCS ES08MA II, please confirm before purchase, this is not the original brand
  • Application Scope: Helicopters KT, fluttering, gliding, small robots, and other models

7. ZOSKAY 35kg high Torque Coreless Motor servo Metal Gear Digital and Stainless Steel Gear servo arduino servo for Robotic DIY

  • DS3235 35KG Coreless Stainless Steel Gear Waterproof Digital Servo
  • High reliability、good stability、strong adaptability, Low noise、small vibration、smooth operation、long life.
  • Copper & Aluminum / Stainless Steel & Aluminum
  • High performance digital standard servo,High-precision metal gears (Stainless steel gear)with hard anodizing.
  • CNC aluminium middle Shell,Dual ball bearings

8. ANNIMOS 20KG Digital Servo High Torque Full Metal Gear Waterproof for RC Model DIY

  • Upgraded Version – advanced linearity and accuracy with precision potentiometers,stable,low noise,water-proof.
  • Large Torque – maximum torque is up to 21.5 kg/cm (298.5 oz/in)@6.8V
  • High Quality – equipped with strong copper & aluminum gears,CNC aluminium middle Shell
  • High Rotation – well-controlled, 270 degree rotation.
  • Dimensions – 1.58×0.79×1.60inch (40x20x40.5mm);Weight: 60g (2.12oz) only

9. ZOSKAY Servo High Torque Metal Gear Standard Digital Servo 25KG/0.13S 6.8V for 1/8 1/10 RC Cars(Control Angle 180)

  • 25KG servo – maximum torque can up to 25kg.cm (6.8V)
  • Digital servo features HV high torque, metal gear, fast heat dissipation, sensitivity and responsiveness.
  • High- metal gear with hard anodizing for better accuracy CNC aluminium middle shell enhances heat dissipation and longer service life.
  • High Quality – equipped with strong copper & aluminum gears,CNC aluminium middle Shell,made of first-grade material.
  • Standard servo size:40 x 20 x 40.5 mm ( 1.58 x 0.79 x 1.60 in) 1/8 1/10 scale car

10. ANNIMOS 35KG Coreless Digital Motor Servo 7.4V High Speed Stainless Steel Gear High Torque Waterproof Standard Baja Servos (270 Degrees)

  • Used For: 1/10 1/8 scale Crawler / Buggy / Truck and any application where waterproof standard servos are used.
  • The Coreless motor provides high speed, response, incredible efficiency and low power consumption.
  • High precision potentiometers and High-resolution digital chip, stable performance, strong anti-interference ability, fast response, high precision, control is more delicate and smooth operation.
  • High performance digital standard servo
  • Full waterproof servo to maintain good water tightness in wet conditions.